 |
 |
RAH PRE-TORQUE RUPTURE DISK HOLDER
- Pre-Torque Design allows
...pre-assembly of a rupture disk into a holder prior to field installation
...removal of the assembly from the piping system for inspection without disturbing the seal integrity of the Rupture Disk
...mounting between soft or fragile material flanges (PVC, Glass, etc.) and sealed by using a soft gasket material with low
torque on the companion flange boltingBest choice for low and intermediate burst ratings
- Mounts directly between standard ASME B16.5, PN, or JIS flanges
- Sizes 1” thru 12”
- Standard Holder Materials:
Carbon Steel, 316SS, Hastelloy
Bulletin
No. 475100 - RAH
|
|
 |
|
|
 |
-
Solid metal Scoreless disk designed for Non-Fragmentation
-
Best choice for Intermediate range of burst ratings (12psi to 200 psi)
- Standard operating ratio of 90% of the marked
rating on disk tag. (Higher operating ratio
available upon request)
- ASME UD, CE, and TUV compliance available (Liquid and Gas Service)
Bulletin
No. 475300 - RA6
|
|
 |
RA8 SERIES RUPTURE DISK
- Solid metal Scoreless disk designed for Non-Fragmentation
-
Best choice for Upper range of burst ratings (26psi to 1000 psi)
- Standard operating ratio of 90% of the marked
rating on disk tag. (Higher operating ratio
available upon request)
- ASME UD, CE, and TUV compliance available (Liquid and Gas Service)
Bulletin
No. 475400 - RA8
|
| |
 |
RAX SERIES RUPTURE DISK
- Solid metal Cross-Scored disk designed for Non-Fragmentation
-
Best choice for Upper range of burst ratings (27psi to 1000 psi)
- Standard operating ratio of 90% of the marked
rating on disk tag. (Higher operating ratio
available upon request)
- ASME UD, CE, and TUV compliance available (GAS SERVICE ONLY)
Bulletin
No. 475500 - RAX
|
|
|
| |
| |
